|
Inverter |
|
|
PV input parameters |
Description |
|
Max input power |
6500W |
|
MPPT voltage range |
125V to 550V |
|
Rated input current |
11A per input |
|
Number of MPP trackers |
2 |
|
On-grid output parameters |
Description |
|
Rated on-grid output apparent power |
5000VA |
|
Max on-grid input apparent power |
9200VA |
|
Rated output voltage |
230V AC, 50Hz |
|
Max on-grid output current |
24.5A |
|
Power factor |
~1 (0.8, leading/lagging, adjustable) |
|
Total harmonic distortion (THD) |
<3% |
|
Off-grid output parameters |
Description |
|
Rated off-grid output apparent power |
4600VA |
|
Peak off-grid output apparent power |
6900 VA,10 sec |
|
Max output current |
20A |
|
Rated output voltage |
230 (±2%) VAC |
|
Rated output frequency |
50 (±2%) Hz |
|
Total harmonic distortion (THD) |
＜3% |
|
General |
Description |
|
Max efficiency |
97.6% |
|
Operating temperature |
-25°C to 60°C |
|
Operating humidity |
0% to 95% (RH) |
|
Cooling |
Natural convection |
|
Display |
LED indicator, app |
|
BMS communication |
RS485, CAN |
|
Wireless communication |
Wi-Fi |
|
Ingress protection |
IP65 |
|
Battery |
|
|
Basic parameters |
Description |
|
Rated energy |
10.24kWh |
|
Cell |
Lithium iron phosphate |
|
Nominal voltage |
51.2 VDC (25°C ±2°C) |
|
Battery self-discharge rate |
≤3.5%/month (25°C, 40% SOC) |
|
Cycle life |
≥6000 (0.5C/0.5C, 70% DOD) |
|
Rated capacity |
200Ah |
|
Nominal discharge current |
100A |
|
Max continuous discharge current |
100A |
|
Nominal charge current |
100A |
|
Max continuous charge current |
100A |
|
Internal impedance |
> 100mΩ |
|
IP level |
IP65 |
|
Max withstand voltage |
1500 VDC |
|
Operating temperature |
Charge: 0°C to 55°C |
|
Storage temperature |
-30°C to 60°C |
|
Storage humidity |
5% to 95% (RH) |
|
Physical |
|
|
Basic parameters |
Description |
|
Dimensions |
1320mm (H) * 700mm (W) * 212mm (D) |
|
Weight |
149kg |
|
Ingress protection |
IP65 |
|
Operating environment |
Description |
|
Operating temperature |
Charge: 0°C to 55°C |
|
Operating humidity |
5% to 95% (RH) |
|
Altitude |
≤2000m |
ESS-SAH5B10-A-EU
Residential Energy Storage System
ESS-SAH5B10-A-EU is a solar energy storage device that can operate both on and off grid. It is integrated with a 5kW high-power inverter, a 10.24kWh lithium-iron phosphate (LiFePO4) battery, and a Wi-Fi module that allows user to monitor system status at any time through the mobile app. The device can receive power from the mains and two MPPT inputs, and can output a maximum of 5kW AC to power a variety of household appliances or store excess power to battery or feed back to the grid for economic benefits and flexible energy use. It is intended for residential use and provides multiple modes to meet different needs in different scenarios.
- Built-in 5kW on&off-grid inverter to power multiple different household appliances at the same time.
- High-performance 10.24kWh lithium-iron phosphate (LiFePO4) battery, safe, reliable, and long lifespan (up to 6,000 cycles).
- Supports off-grid operation, can seamlessly switch between on/off-grid mode in backup mode to supply power without interruption.
- Integrated design, simple and stylish appearance, easy to transport and install.
- Multiple indicators show at-a-glance system status.
- Built-in Wi-Fi module allows remote system monitoring through a mobile app, achieving 24-hour automatic energy management and real-time update.
- Multiple modes available for user to choose for maximum system utilization in different scenarios.
- Ultra-wide photovoltaic input voltage range (125~550V), up to 11A input current, compatible with different photovoltaic arrays. Max 6500W input power, which is 1.3 times of the rated DC output power.
- Two independent MPPT inputs meet different installation scenarios in households.
- Fanless integrated and efficient heat dissipation technology allows a quieter environment and longer lifespan of system components.
- Integral cabinet, reinforced protection plate for battery compartment, IP65 ingress protection.
- BMS intelligent battery management system safeguards battery with integrated protections such as overvoltage protection, over-discharge protection, overcurrent protection, short-circuit protection, high temperature protection, low temperature protection, etc.
- Supports cold startup.
- Inverter’s conversion efficiency up to 97.6%.
- Multiple inverter protections: DC insulation resistance monitoring, residual current monitoring, anti-islanding protection, input reverse polarity protection, AC overcurrent protection, AC short-circuit protection, AC overvoltage protection.
- 5-year warranty, CE, UN38.3, UL1973, UL9540, IEC62619 certificates.
Description